Nearly Forty Years
Hardesty has been handling heating and cooling in Le Roy since 1986, which is longer than most of the equipment we get called out to look at.
Family owned in Le Roy since 1986, serving McLean and DeWitt counties
Office Monday to Friday, 8:00 am to 3:30 pm
24-hour on-call (309) 962-4328
Hardesty Heating & Cooling, Since 1986
Heating and cooling repair, replacement, and new installs for Central Illinois homes and businesses. Family owned in Le Roy and on call 24 hours.
What We Do
Pick a service to see what is included. Everyday repairs through complete replacements and new construction, all from one family shop.

An air conditioner that runs without cooling, freezes over, or trips the breaker. The fault gets found before any part is ordered, because the wrong part swapped twice costs more than the right one once.

A furnace that will not light, cycles off early, or leaves the house cold. Ignitors, flame sensors, and pressure switches cause most no heat calls, and the burners get looked at while the panel is already off.

Complete unit replacement when a system is genuinely past repair. The replacement gets sized to the building rather than matched to whatever came out of it, and the sheet metal is part of the job rather than an afterthought.

Seasonal service that keeps a system running the way it was built to. Clean coils, correct airflow, and small faults caught while they are still small and cheap.

HVAC on new residential and commercial builds, from duct layout through the finished install. Getting the ductwork right while the walls are open is the difference between a building that holds its temperature and one that never does.

Businesses, property owners, and general contractors. The same shop that fabricates the sheet metal handles the service calls, the replacements, and the installs.
Service Area
From our shop in Le Roy, Hardesty serves homes and businesses across Central Illinois, from Bloomington and Normal to Clinton and the towns in between.
Le Roy
Home base. Our shop is at 410 W Bicentennial Drive.
Distances are straight-line miles from our Le Roy shop. Outside this list? Call and ask.
About Hardesty
Three generations of HVAC and custom sheet metal workers, running the same shop for nearly forty years.
Hardesty has been handling heating and cooling in Le Roy since 1986, which is longer than most of the equipment we get called out to look at.
A family business of HVAC and custom sheet metal workers. The name on the sign is the name of the family running the shop.
Residential service and replacement, commercial heating and cooling, and new construction HVAC for builders across McLean and DeWitt counties.
Repair Or Replace
Drag the handle to your system's age. The honest answer usually starts there.
Not sure? The manufacture date is usually printed on the metal plate on the side of the furnace or the outdoor unit.
Normal territory. Repairs still make sense, and most faults are a single part rather than the system giving up.
General guidance on how age affects the decision, not a diagnosis. Every Hardesty call starts by finding the actual fault.
Symptoms
Pick the problem and see what usually causes it, before you call.
A capacitor, a contactor, a dirty coil, or low refrigerant. Refrigerant is not consumed, so if it is low it leaked, and topping it off without finding the leak means paying again next summer.
Ignitors, flame sensors, and pressure switches cause most no heat calls, and most are handled on the same visit. The burners get checked while the panel is already off.
One room that never keeps up is rarely the furnace. Usually it is an undersized run, a crushed duct, or a return that cannot pull enough air, and it gets fixed without new equipment.
It starts, runs briefly, shuts off, then repeats. A restricted filter, a failing switch, a refrigerant fault, or a system that was oversized on day one.
Before You Replace Anything
Two identical furnaces in two identical houses do not perform the same. What separates them is sizing, ductwork, and airflow, and none of it appears on the equipment sticker.
Bigger is not better. An oversized system short cycles, never runs long enough to pull humidity out of the air, and wears itself out faster. The right size comes from the building: square footage, insulation, windows, and which way it faces.
Most buildings get new equipment attached to old duct. If the returns are undersized or a trunk is crushed, the new system inherits every problem the old one had, and you paid for the equipment expecting it to fix them.
A system moving the wrong amount of air will not reach its rated efficiency no matter what the label says. Filter choice, return sizing, and duct sizing all pull on the same number, which is why they get looked at together.
Plenums, transitions, and connections fabricated to fit the space rather than forced and taped. Three generations of this shop have been sheet metal workers, which is why the metal gets the same attention as the equipment.
Not sure whether you are looking at a repair or a replacement? Ask before you commit to either one.
How It Works
The same process every time, so you always know what happens next.
Tell us what the system is doing and roughly how old it is.
The actual problem, identified before anything gets quoted.
Repair, replace, or leave it alone, with the reasoning.
Service, a complete replacement, or a new construction install.
Hardesty Heating & Cooling started in 1986 and is family owned, with three generations of HVAC and custom sheet metal workers. That is nearly forty years of heating and cooling in Le Roy.
It comes down to the cost of the repair against how many seasons the system realistically has left. A cheap part on a ten year old furnace is worth fixing. A major component on a twenty year old one usually is not. The fault gets found first either way, so the number you are comparing is a real one.
It depends on the equipment, how it was installed, and how it has been maintained. A system that was correctly sized and kept clean lasts noticeably longer than one that has been short cycling for years. Age alone does not decide it, but it does change the math.
Usually airflow rather than the equipment. An undersized or crushed duct run, a return that cannot pull enough air, or a system that was never balanced will all leave one room behind while everything else is fine. Worth checking before anyone suggests replacing the furnace.
Yes. Hardesty works on commercial heating and cooling alongside residential, plus HVAC on new residential and commercial construction, including duct layout and custom sheet metal fabrication.
Yes. Hardesty provides 24-hour on-call service for heating and cooling emergencies. Call (309) 962-4328 any time, day or night.
Trane, American Standard, Carrier, and Amana, and we service all makes and models, including equipment someone else installed.
Le Roy, Bloomington, Normal, Farmer City, Downs, Heyworth, Clinton, Saybrook, and the surrounding communities across McLean and DeWitt counties.
The shop is at 410 W Bicentennial Drive in Le Roy, with the office open Monday through Friday from 8:00 am to 3:30 pm. For heating and cooling emergencies, we are on call around the clock.
The Next Step
Book online and the office will confirm, or call (309) 962-4328 during shop hours.
Request Service
Send a booking request online and the office will confirm a time with you. Prefer to talk it through? Call (309) 962-4328.
410 W Bicentennial Drive, Le Roy, Illinois 61752
Office Monday to Friday, 8:00 am to 3:30 pm. On call 24 hours for emergencies.
Le Roy, Bloomington, Normal, Farmer City, Downs, Heyworth, Clinton, and Saybrook
1986, family owned, three generations